KIT-GASKET (T) 4250548 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     −     Guide Bolt
1/2 - 13 NF by 8 inch     1    
B     4C-5593     Thread Lubricant     −    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove the belts. Refer to the Operation and Maintenance Manual, "Belts - Inspect".
Illustration 1 g03400456
Remove bolts (1) and remove pulley (2) .
Illustration 2 g03400523
Remove two bolts and install Tooling (A). Remove bolts (3). Using two people, remove vibration damper (4). The weight of the vibration damper is approximately 36 kg (80 lb).Installation Procedure
Install vibration damper (4) in the reverse order.
Apply Tooling (B) to bolts (1) .
Tighten bolts (1) to a torque of 270 40 N m (200 30 lb ft).