KIT- 4349762 - Caterpillar

Illustration 1 g06181145
Table 1
Specification for 418-9883 Engine Oil Lines Gp
Item Qty Part Specification Description
1 6 109-2332 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
2 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
3 2 7N-7697 Plunger Valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
Valves must be fully open at a pressure difference of 200 30 kPa (29 4 psi).
4 2 6B-9202 Spring Length under test force is 68.3 mm (2.69 inch).
Test force is 85.0 to 100.0 N (19.0 to 22.4 lb).
Free length after test is 112.7 mm (4.44 inch).
5 4 0S-1571 Bolt Use the following procedure to tighten the clamp bolts:
1. Snugly tighten the clamp assembly to the tube.
2. Tighten the clamp assembly to the elbow.
3. Tighten the clamp assembly to the tube.
6 4 0S-1594 Bolt Use the following procedure to tighten the clamp bolts:
1. Snugly tighten the clamp assembly to the tube.
2. Tighten the clamp assembly to the elbow.
3. Tighten the clamp assembly to the tube.