KIT-GLASS 4363076 - Caterpillar

Specifications
Table 1
Required Tooling    
Tool     Part Number     Part Description     Qty    
A     -     Loctite 242     1    
Illustration 1 g03491180
Right side view
Table 2
Specification for 425-2883 Refrigerant Condenser and Mounting Gp    
Item     Qty     Part     Specification Description    
1     4     6V-5218 Bolt     Before assembly, apply Tooling (A) to the threads.
Torque to
15 3 N m (133 27 lb in).    Removal Procedure
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Recover the air conditioner refrigerant. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the recovery and the charging procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
Illustration 2 g03635091
Disconnect hose assembly (2) and hose assembly (4). Remove bolts (3) and refrigerant condenser (1) .Installation Procedure
Install refrigerant condenser (1) in the reverse order of removal.
Before assembly, apply Tooling (A) to the threads of bolts (3) .
Tighten bolts (3) to a torque of 15 3 N m (133 27 lb in).