KIT-ENGINE GASKET 4375103 - Caterpillar

Illustration 1 g01142230
Note: All bores must be free of paint. Coat all bores for pins with lubricant. (1) After assembly, coat all bores and bearings with lubricant. (2) Lubricate the sealing lip slightly with the lubricant that is being sealed. (3) Use the necessary shims to adjust the lateral clearance. If more than two shims are required, use a minimum of one shim at interface of each boss. Maximum clearance ... 0.6 mm (0.02 inch) 150-5699 Shim ... 0.6 mm (0.02 inch) 150-5689 Shim ... 1.0 mm (0.04 inch) (4) The dust seal must be assembled with the lip on the outside of the boss. (5) 150-5694 Bushing Outside diameter ... 60.166 0.025 mm (2.3687 0.0010 inch) Inside diameter ... 50.238 0.025 mm (1.9779 0.0010 inch) Install the bearing in the bearing bore. ... 6.0 0.8 mm (0.240 0.032 inch) (6) 146-2304 Bushing Outside diameter ... 55.149 0.015 mm (2.1712 0.0006 inch) Inside diameter ... 45.221 45.015 mm (1.7804 1.7722 inch) Install the bearing in the bearing bore. ... 5.0 0.5 mm (0.200 0.020 inch) (7) 146-2304 Bushing Outside diameter ... 50.133 0.015 mm (1.9737 0.0006 inch) Inside diameter ... 40.205 0.015 mm (1.5829 0.0006 inch) Install the bearing in the bearing bore. ... 5.0 0.5 mm (0.20 0.02 inch)