KIT-DT GASKET 4417010 - Caterpillar

Note: Portions of this material are reprinted with permission from SAE J1939DA_201607© 2016 SAE International. SAE International is not responsible for any use or translation of this material, in whole or in part. Please contact SAE International to obtain a complete copy of SAE J1939DA_201607, the official definitive source of this standard.Engine Monitoring
The Electronic Control Module (ECM) monitors the operating parameters of the engine. The ECM will generate an event code if a specific engine parameter exceeds an acceptable range that is defined by the engine monitoring system. For information on the engine monitoring system, refer to Troubleshooting, "Engine Monitoring System".Cross-Reference Information for Event Codes
Event codes are generated when abnormal operating conditions exist. Table 1 is a list of the event codes for the engine. The event codes are cross-referenced with the appropriate procedure that can be used to troubleshoot the code.
Table 1
Cross-Reference from Diagnostic Trouble Codes to Functional Test or Procedure
J1939 Code and Description Troubleshooting Procedure
167-1
Charging System Potential : Low - most severe (3) Troubleshooting, "Alternator Problem"
167-15
Charging System Potential : High - least severe (1) Troubleshooting, "Alternator Problem"
167-17
Charging System Potential : Low - least severe (1) Troubleshooting, "Alternator Problem"
4779-0
Aftertreatment #1 Three Way Catalyst Differential Gas Temperature :