4425875 KIT-SEAL Caterpillar parts
Rating:
Alternative (cross code) number:
CA4425875
442-5875
4425875
CA4425875
442-5875
4425875
Weight: 0.28 pounds 0 kg.
Information:
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Fuel Filter With Canister
Close the fuel supply valve.
Illustration 1 g01122129
Clean the outside of the fuel filter assembly.
Open the fuel drain (2) in the bottom of the filter assembly, if equipped. Drain the fuel into a suitable container.
Loosen the setscrew (1).
Remove the canister (3).
Illustration 2 g00917937
Assemble the following items: seals (8), seal (7), canister (9) and base (10). Place washer (5) and seal (6) on setscrew (4).
Fasten the assembly to the fuel filter base with setscrew (4). The fuel system will need to be primed after the new filter is installed. Refer to this Operation and Maintenance Manual, "Fuel System - Prime".Fuel Filter With Element
Close the fuel supply valve (1).
Illustration 3 g01122130
Clean the outside of the fuel filter assembly.
Loosen the locking ring (3).
Remove the casing for the filter (2) and the element.
Illustration 4 g01122131
Assemble the following items: seal (5), filter element (6) and casing (7).
Install the assembled items to the filter head (4).
Install the locking ring (8) to the filter head. Rotate the locking ring in order to lock the assembly. The fuel system will need to be primed after the new filter is installed. Refer to this Operation and Maintenance Manual, "Fuel System - Prime".
Parts kit Caterpillar catalog:
4425189
KIT-
Caterpillar
Caterpillar
4421729
KIT-HANDLE
Caterpillar
Caterpillar
4421728
KIT-VALVE
Caterpillar
Caterpillar
4421726
KIT-SEAL
Caterpillar
Caterpillar
4421725
KIT-SEAL
Caterpillar
Caterpillar
4421723
KIT-SEAL
Caterpillar
Caterpillar
4434116
KIT-
Caterpillar
Caterpillar
4433946
KIT-ROPS BAR
Caterpillar
Caterpillar
4433171
KIT-GENERATOR
Caterpillar
Caterpillar
4432489
KIT-
Caterpillar
Caterpillar
4430436
KIT-
Caterpillar
Caterpillar
4428662
KIT
Caterpillar
Caterpillar