KIT-OIL COOLER & LINES GASKET 4440532 - Caterpillar

Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Use the identification marks on the engine oil cooler and the bonnet for proper alignment during assembly.
Illustration 1 g00770809
Install elbow (5) on tube (6) .
Install elbow (5) and tube (6) on oil cooler bypass body (3) .Note: Use clean engine oil to lubricate the O-ring seals.
Illustration 2 g00770920
Illustration 3 g00770734
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (2) and bypass valve (4) in oil cooler bypass body (3) .
Install cover (1) on oil cooler bypass body (3) .
Lubricate the new O-ring seals with clean engine oil. Install the elbow and the oil cooler bypass body on the engine oil cooler.End By: Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".