KIT-NUT 4465513 - Caterpillar

AFFECTED PRODUCT
Model Identification Number
C13 NH301155, 1164, 1167-1168, 1178, 1180, 1182, 1186-1187, 1189, 1191, 1196, 1206-1208
C15 LNA02943, 2977-2978, 2991, 2994, 3012
C18 LNB01799, 1804, 1822, 1829-1831, 1842-1852, 1864, 1866-1867
PARTS NEEDED
Qty
Part Number Description
1 5211582 SCREEN GP-BASIC (as needed - see Rework Procedure)
1 5211583 SCREEN GP-BASIC (as needed - see Rework Procedure)
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-10000 hrs,
0-18 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
1) If you have an IP21 Guard as shown in the picture below for an A Frame generator then you need to remove this guard.
Image1.1.1
2) Remove the nuts and bolts as shown below and remove guard (keep the nuts & bolts)
Image1.2.1
3) Depending on the generator frame size, replace guard with the following parts and reattach using the bolts removed from original guard.
A2900 Frame = 521-1582
A3300 Frame = 521-1583
Image below depicts the A Frame IP23 Guard (check there is no gaps between guard and frame of the generator and tighten the nuts and bolts)
Image1.3.1