KIT-GASKET 4500349 - Caterpillar

The following two coolants are used in Caterpillar diesel engines:Preferred - Caterpillar Extended Life Coolant (ELC) or a commercial extended life coolant that meets the Caterpillar EC-1 specificationAcceptable - A Caterpillar Diesel Engine Antifreeze/Coolant (DEAC) or a commercial heavy-duty coolant/antifreeze that meets "ASTM D4985" or "ASTM D5345" specifications
Do not use a commercial coolant/antifreeze that only meets the ASTM D3306 or D4656 specification. This type of coolant/antifreeze is made for light duty automotive applications.
Caterpillar recommends a 1:1 mixture of water and glycol. This mixture of water and glycol will provide optimum heavy-duty performance as a coolant/antifreeze.Note: Caterpillar DEAC DOES NOT require a treatment with an SCA at the initial fill. Commercial heavy-duty coolant/antifreeze that meets "ASTM D4985" or "ASTM D5345" specifications MAY require a treatment with an SCA at the initial fill. Read the label or the instructions that are provided by the OEM of the product.In stationary engine applications and marine engine applications that do not require anti-boil protection or freeze protection, a mixture of SCA and water is acceptable. Caterpillar recommends a six percent to eight percent concentration of SCA in those cooling systems. Distilled water or deionized water is preferred. Water which has the recommended properties may be used.
All Caterpillar diesel engines equipped with air-to-air aftercooling (ATAAC) require a minimum of 30 percent glycol to prevent water pump cavitation.
Table 1
Coolant Service Life
Coolant Type Service Life
Caterpillar ELC 6000 Service Hours or Six Years
Caterpillar DEAC 3000 Service Hours or Three Years
Commercial Heavy-Duty Coolant/Antifreeze that meets "ASTM D5345" 3000 Service Hours or Two Years
Commercial Heavy-Duty Coolant/Antifreeze that meets "ASTM D4985" 3000 Service Hours or One Year
Caterpillar SCA and Water 3000 Service Hours or Two Years
Commercial SCA and Water 3000 Service Hours or One Year