4501777 KIT-PUMP Caterpillar parts
320E, 320E L, 320E LN, 323D2 L, 323E L, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LH, 336E LN, 349E, 349E L HVG, 349E L VG, 374F L, 390F L
Rating:
Alternative (cross code) number:
CA4501777
450-1777
4501777
CA4501777
450-1777
4501777
Weight: 1 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 4501777:
Number on catalog scheme:
For full view, you need register
Information:
Single Piece Drop Center Rim.Caterpillar has introduced the Single Piece Drop Center (SPDC) rims. These rims reduce the risk of incorrect assembly. Since no O-ring seal is required, the possibility of early hour leaks is also reduced. They are identified by a deep well or channel around the rim base.Caterpillar now has new tire removal tools available for mounting or dismounting the tires on these rims. This publication will show the part numbers and how to use the new tools.Reference: Caterpillar Tool Guide, Operation & Maintenance Manual.Necessary Tools
Preparation
1. To simplify following the instructions set forth we recommend laying out the three bars as shown in the photo.Using paint, (or a suitable substitute) number the bars (1), (2) and (3). Label the ends of the bars A, B, C, D, E and F respectively.Tire Removal
A. Curved Flange. B. Straight Flange.* The Bead Buster® is designed for use with SPDC rims that do not have a curved flange. It should not be used on rims of that type.1. Remove the valve core from the valve stem. Push a piece of wire down through the valve stem to be sure it is not plugged. Wait until all of the air is out of the tire before proceeding.2. Lay the tire down flat with the valve stem up.Using the Bead Buster®
1. Coat the perimeter of the rim/tire joint with a soapy water solution. 2. Place the fingers of the Bead Buster® between the rim and the tire. If the tire has a pry notch it will probably be easier to insert the Bead Buster® at that location, to begin with. It may be necessary to insert a flat tipped pry bar between the tire and rim to allow the fingers of the Bead Buster® to be inserted.3. Force the fingers of the Bead Buster® between the rim and the tire. This is more easily done by striking the tool at location (G) with a hammer. Be sure the Bead Buster® is fully inserted so that it is against the rim at location H. 4. Using a 1/2" ratchet and a 1 1/4" socket on the head of the Bead Buster®, push downward on the Bead Buster® until it is perpendicular to the rim.5. Tighten adjuster screw (4) enough to let the locking mechanism hold the tool in a perpendicular position when lever (5) is engaged. Excessive force on the locking mechanism lever is not required to hold the tool in position.6. With the lever fully engaged, use a 1/2" ratchet (or an air wrench) to turn the hex head. This separates the fingers on the Bead Buster® applying pressure to the bead of the tire.* Apply pressure until the tire is approximately 51 mm (2.0") away from the rim.7. Release the pressure, disengage lever (5), remove and relocate the Bead Buster® about 152 mm (6.0") around the tire perimeter.* Repeat Steps 2 through 7, until the tire breaks loose from the rim, all the way around.8. Turn the tire and rim over
Cat SIS web machinery list:
Parts kit Caterpillar catalog:
320D, 320D FM, 320D FM RR, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E L, 323D L, 323D2 L, 324D, 324D L, 324E, 324E L, 324E LN, 326D L
320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D L, 326D ...
324D, 324D FM, 324D L, 324D LN, 324E L, 324E LN, 329E L, 329E LN
320D, 320D L, 320D LN, 320D LRR, 320D2, 320D2 L, 323D L, 323D2 L
320D, 320D L, 320D LN, 320D LRR, 320D2, 320D2 L, 323D L, 323D2 L
320D, 320D L, 320E L, 325D, 325D L, 328D LCR, 329D, 329D L
320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 325D, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329E LN
320D, 320D L, 320E, 320E L, 320E LN, 325D, 325D L, 328D LCR, 329D, 329D L
345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 365C L MH, 374D L, 374F L, 385C L MH
324D, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 340D L, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E L, 349E L VG, 365B, 365C
324D, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E L, 336E LN, 336F L, 340D L, 340D2 L, 345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E...
365B, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
4501776
KIT-PUMP
320E, 320E L, 320E LN, 323D2 L, 323E L, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LH, 336E LN, 349E, 349E L HVG, 349E L VG, 374F L, 390F L
320E, 320E L, 320E LN, 323D2 L, 323E L, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LH, 336E LN, 349E, 349E L HVG, 349E L VG, 374F L, 390F L
4501775
KIT-PUMP
320E, 320E L, 320E LN, 323D2 L, 323E L, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LH, 336E LN, 349E, 349E L HVG, 349E L VG, 374F L, 390F L
320E, 320E L, 320E LN, 323D2 L, 323E L, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LH, 336E LN, 349E, 349E L HVG, 349E L VG, 374F L, 390F L
3738396
KIT-VALVE
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
324E, 324E L, 324E LN, 329E, 329E L, 329E LN
3583797
KIT-MODULE-OUTLET
324E, 324E L, 324E LN
324E, 324E L, 324E LN
3629633
KIT-MODULE-INLET
324E, 324E L, 324E LN
324E, 324E L, 324E LN
4439888
KIT-SEAL
M322D, M322D MH
M322D, M322D MH
4264607
KIT-SEAL
525D
525D
4264606
KIT-STACK
525D
525D
4264605
KIT-BEARING
525D
525D
320D, 320D2
320D, 320D2
320D, 320D2