KIT-SEAL 4540426 - Caterpillar

Flood Lamps (for Small Off-Highway Trucks Only)
Illustration 1 g01913135Flood lamps are mounted to the brackets for the camera on the left and right side of the machine. The flood lamp is used in order to provide illumination for the cameras that are mounted to the sides of the machine.
Table 1
Pin Input
1 24 V
2 Ground Power Converter
Illustration 2 g02407197
Table 2
Wire Table
Signal Identification Pin Number
+24 V Input 1
Ignition 2
Ground 3
+ 12 V Unswitched 4
+ 12 V Switched 5
Ground 6 The power converter is designed in order to provide the 12 VDC that is required to operate the object detection sensors. The converter converts 24 VDC to 12 VDC. The electrical system of the machine provides battery voltage to the converter via the circuit breaker and the main power relay for the system. The output circuit of the converter connects to the object detection sensors. There is not a connection between the converter and the display. The display does not detect any failures in the circuits of the power converter, but the object detection sensors will report power issues with internal diagnostics of the sensors.