KIT-SEAL 4560207 - Caterpillar

Illustration 1 g03368526
Table 1
Specification for 372-6471 Fuel Injection Pump Gp
Item Qty Part Specification Description
1 1 8T-0644 Bolt Torque to 70 15 N m (52 11 lb ft).
2 1 230-3775 O-Ring Seal Lubricate the seal lightly with a 50/50 mixture of green 8T-2998 Lubricant and engine oil.
3 1 230-3728 O-Ring Seal Lubricate the seal lightly with a 50/50 mixture of green 8T-2998 Lubricant and engine oil.
Illustration 2 g03368530
378-4610 Fuel Injector Gp
Table 2
Item Qty Part Specification Description
4 1 333-4871 Spring Length under test force is 77.0 mm (3.03 inch).
Test force is 550.0 26.0 N (123.6 5.8 lb).
Free length after test is 88.24 mm (3.474 inch).
5 4 283-8654 Screw Torque to 1.1 0.1 N m (9.7 0.9 lb in).
6 1 348-4049 Unit Injector Nozzle Lubricate the threads with Vactra No. 2 MSDS 5380.
Torque to 12 N m (106 lb in) and start tracking turn angle to reach final turn angle of 43 2 degrees. Final case torque to reach 100 20 N m (74 15 lb ft).
7 1 254-4379 Nozzle Spring Length under test force is 12.73 mm (0.501 inch).
Test force is 239.5 10.0 N (53.8 2.2 lb).
Free length after test is 15.25 mm (0.600 inch).
Illustration 3 g03368531
298-5517 Actuator As
Table 3
Item Qty Part Specification Description
8 1 421-5853 Flat Head Screw Before assembly, apply green Loctite 290 to the threads.
Torque to 2.9 0.7 N m (25.7 6.2 lb in).
9 1 269-3183 Solenoid Spring Length under test force is 11.541 mm (0.4544 inch).
Test force is 70.8 N (15.9 lb).
Free length after test is 12.6 mm (0.50 inch).
10 1 254-4376 Spacer Select the spacer to provide spring force of 80.0 1.0 N (18.0 0.2 lb).
11 1 298-5534 Nut Torque to 1.1 0.1 N m (9.7 0.9 lb in).