KIT-SEAT 4574256 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-7498     Support Stand As     4    
1U-7501 Extension Tube     4    
B     138-7573     Link Bracket     3    
C     323-1146     Engine Lifting Device     1    
Illustration 1 g02029066
Attach Tooling (B) and a suitable lifting device onto engine oil pan (13). The weight of engine oil pan (13) is approximately 958 kg (2108 lb). Position engine oil pan (13) onto platform (15). Reach through the holes in platform (15) in order to install bolts (16) .
Illustration 2 g02415416
Attach Tooling (C) onto the engine. The weight of the engine is approximately 11818 kg (26054 lb). Remove the engine from Tooling (A) .
Illustration 3 g02029024
Note: Install portions of the heat shield after Tooling (C) has been removed.
Position gasket (14). Lower the engine onto engine oil pan (13). Remove Tooling (C) .
Illustration 4 g02028701
Install bolts (12) on all sides of engine oil pan (13) .
Illustration 5 g02028650
Connect harness assemblies (8), (10), and (11). Connect hose assembly (9) .
Illustration 6 g02028643
Connect hose assemblies (6) and (7) .
Illustration 7 g02416356
Connect harness assemblies (5), (2), and (1). Install the flange and adapter (4). Install bolts (3) .Note: Ensure that all water, fuel, exhaust, and electrical connections have been installed.
Fill the engine with oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Turn the fuel supply valve to the ON position.
Turn the battery disconnect switch to the ON position.End By: Install the engine oil pump.