KIT- 4598287 - Caterpillar

Start By:
Remove the precleaner. Refer to Disassembly and Assembly, "Precleaner - Remove and Install" in this module.
Remove the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install" in this module.
Illustration 1 g00608019
Open enclosure door (1) .
Illustration 2 g00608020
Remove the eight bolts, two hinges (2), and enclosure door (1). Repeat this step on the other side.
Illustration 3 g00608023
Remove two bolts (3) and the washers. Remove plate (4). Repeat this step on the other side.
Illustration 4 g00608024
Remove three bolts (5), the washers, and bracket (6) from each side of the hood.
Illustration 5 g00608027
Remove bolt (7) and the two washers from the hood.
Illustration 6 g00608032
Note: The hood weighs 42 kg (93 lb).
Use tool (A) and a suitable lifting device to remove hood (8) .Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Description     Qty    
A     138-7573     Link Brackets     3    
Illustration 7 g00608032
Note: The hood weighs 42 kg (93 lb).
Use a suitable lifting device and tool (A) to install hood (8) .
Illustration 8 g00608027
Install the two washers and bolt (7) on the hood.
Illustration 9 g00608024
Install bracket (6), the washers, and three bolts (5) on each side of the hood.
Illustration 10 g00608023
Install plate (4). Install the washers and two bolts (3). Repeat this step on the other side.
Illustration 11 g00608020
Install enclosure door (1). Install two hinges (2) and the eight bolts. Repeat this step on the other side.
Illustration 12 g00608019
Close enclosure door (1) .End By:
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install" in this module.
Install the precleaner. Refer to Disassembly and Assembly, "Precleaner - Remove and Install" in this module.