KIT- 4598326 - Caterpillar

Disassembly Procedure
Start By:
Remove the fan drive. Refer to Disassembly and Assembly, "Fan and Fan Drive - Remove and Install" in this module.
Illustration 1 g00583126
Remove bolt (1) and plate (2) from the shaft.
Illustration 2 g00583127
Remove fan pulley (5) and hub (4) from shaft (3) .
Illustration 3 g00583149
Remove bearing cone (6) from hub (4) .
Illustration 4 g00583150
Remove spacer (7) from hub (4) .
Illustration 5 g00583151
Turn over fan pulley (5). Remove spacer (8) from hub (4). Remove the fan pulley from hub (4) .
Illustration 6 g00583159
Remove seal (9) from hub (4) .
Illustration 7 g00583160
Remove bearing cone (10) from hub (4) .
Illustration 8 g00583162
Use a brass drift to push two bearing cups (11) out of hub (4) .