KIT- 4619026 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 4
B 8C-8422 Sealant 1
Illustration 1 g00984031
Apply Tooling (B) to the sealing face of sending assembly (17). Install sending assembly (17). Install bolts (16).
Illustration 2 g00983960
Install fittings (15).
Illustration 3 g00983959
Position fuel tank (14) on the back of the machine. The weight of fuel tank (14) is approximately 136 kg (300 lb).
Illustration 4 g00983958
Remove Tooling (A) from the front of fuel tank (14).
Illustration 5 g00983957
Install bolts (13).
Repeat Step 5 for the opposite side.
Illustration 6 g00983955
Remove Tooling (A) from the rear of the fuel tank.
Illustration 7 g00983954
Connect harness assembly (12).
Illustration 8 g00983953
Position panel (11) and install screws (10).
Illustration 9 g00983952
Use two people in order to position seat (9). The weight of seat (9) is approximately 32 kg (70 lb). Install bolt (8).
Illustration 10 g00983951
Install cable strap (7). Connect hoses (6).
Illustration 11 g00983948
Install handle (5) and bolts (4).
Repeat Step 12 for the remaining handle.
Fill the fuel tank. Refer to Operation and Maintenance, "Fuel Tank Water and Sediment - Drain".
Illustration 12 g01224293
Position cover (3). Install bolts (2).
Install bolts (1).
Repeat Step 16 for the opposite side.