KIT-GASKET (T) 4627867 - Caterpillar

Illustration 3 g01141439
(C) 261-2096 Spring (D) 271-5945 Pin Spacer On D5M XL machines produced after July 1998, additional springs were manufactured to increase the Recoil Spring Group tension. The springs were designed to be placed inside the stop tube along with 271-5945 Pin Spacer as shown in Illustration 3. The 161-2626 spring was the current spring when this change was made. For SystemOne track the two inner springs, the outer spring and the spacer must be installed as shown in the Illustration 3. The following procedure is to