KIT- 4651382 - Caterpillar

CIC Service Modes Menu
The following is displayed on the CIC Service Modes menu:Mode 0 - Diagnostics and EventsMode 1 - Controller ECM Software Part numbersMode 2 - Machine Parameters ListMode 3 - Component Parameters ListMode 4 - Unit Display SettingsMode 5 - Backlighting ControlSee Table 2 for details of the CIC Service Modes menu.
Table 2
CIC Menu    
Service Modes    
Mode 0
Diagnostics and Events     Diagnostics and Events Codes are Displayed    
Mode 1
Controller ECM Software Part Numbers     Machine Control ECM    
Engine Control ECM
Mode 2
Machine Parameters List        
Mode 3
Component Parameters List        
Mode 4
Unit Display Settings     English    
Metric
Mode 5
Backlighting Control        Following is the content of the CIC Service Modes menu.Mode 0 - Diagnostics and Events
Illustration 15 g01423011
CIC Service Mode 0 - Active Diagnostics LCD Screen
Illustration 16 g01423015
CIC Service Mode 0 - Logged Events LCD ScreenThe Mode 0 - Diagnostics and Events screen displays Active Diagnostics and Logged Events. For details on the diagnostic and event codes, see the Troubleshooting, KENR6324 manual.Mode 1 - Controller ECM Software Part Numbers
The Controller ECM Software Part Numbers screen has the following submenus:Machine Control ECM
Illustration 17 g01391227
Typical Machine Control ECM ScreenThe Machine Control ECM screen displays the following:
Machine Control ECM software part numberEngine Control ECM
Illustration 18 g01391219
Typical Engine Control ECM ScreenThe Engine Control ECM screen displays the following:
Engine Control ECM software part numberMode 2 - Machine Parameters List
Illustration 19 g01391214
Typical Machine Parameters List ScreenThe Machine Parameters List screen displays the following:
List of machine parametersMode 3 - Component Parameters List
Illustration 20 g01391214
Typical Component Parameters List ScreenThe Component Parameters List screen displays the following:
List of Component ParametersMode 4 - Unit Display Settings
Illustration 21 g01391206
Example of Unit Display Settings ScreensThe Unit Display Settings screen displays the following:
The current units in Metric or EnglishMode 5- Backlighting Control
Illustration 22 g01391056
Example of Backlighting Control ScreenThe Backlighting Control allows the operator to change the brightness of the LCD and the gauges as a percent. The value is a range of 99% to 1%.The LCD and the gauges will default to 100% when the lights are off. When the lights are on the backlighting for the LCD and the gauges will be the value that is set by the operator.