KIT-GASKET (T) 4711672 - Caterpillar

Illustration 10 g00872478
Remove rotating group (34) from housing (3). Carefully retain the rotating assembly (34) in housing (3). Turn the rotating assembly upside-down. Slowly lift housing (3) off rotating group (34).
Illustration 11 g00872479
Remove plate (35) and pistons (36) from barrel (37).
Illustration 12 g00872481
Remove retaining ball (38).
Illustration 13 g00872497
Illustration 14 g00872527
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) and a suitable press in order to compress spring (40) until the snap ring (39) can be removed from barrel (37) with Tooling (B). Slowly release the pressure on the press because of the spring pressure. Remove barrel (37) from the press. Remove spring (40), retaining disc (41), and pressure pins (42).
Illustration 15 g00872528
Remove plug (43) and the O-ring seal.
Illustration 16 g00872530
Remove piston (44) from housing (3).
Illustration 17 g00872532Note: The rod is engaged in the socket by the edges of the socket. Extreme care must be used in order to disengage the rod from the socket. Remove the actuator rod out of the smooth shaped socket.
Angle the swashplate (45) so rod (46) extends out of the bore. Remove rod (46) from the socket in swashplate (45).
Illustration 18 g00872540
Remove swashplate (45) from housing (3). Check the condition of socket (47).
Illustration 19 g00872541
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove spring (50).
Remove socket head screws (48) and bearings (49).
Illustration 20 g00872542
Lift shaft (31) out of the housing (3). If necessary, press bearing (49) off shaft (31).
Illustration 21 g00943016
Use Tooling (C) to remove snap ring (51) from housing (3).
Illustration 22 g00943381
Remove seal (52) from housing (3).