KIT-SEAL 4715835 - Caterpillar

Illustration 27 g01301291
Press the "OK" key.The AccuGrade System will begin to calculate the measurements.Refer to Illustration 26.When the AccuGrade System has completed calculations, the window that is shown in Illustration 27 will appear.Refer to Step 4.a through Step 4.c in order to align the blade.
Turn the machine around.
Set the machine on the marks that were made in Step 3.f.
Set the blade on the ground.
Illustration 28 g01301301
Illustration 29 g01301303
Press the "OK" key.The AccuGrade System will begin to calculate the measurements.Refer to Illustration 28.When the AccuGrade System has completed calculations, the window that is shown in Illustration 29 will appear.Refer to Step 5.a through Step 5.b in order to align the blade.
Move the machine in order to align the front and the rear tire marks.
Set the blade on the ground.
Illustration 30 g01301310
Illustration 31 g01300628
Press the "OK" key.The AccuGrade System will begin to calculate the measurements.Refer to Illustration 30.When the AccuGrade System has completed calculations, the window that is shown in Illustration 31 will appear.
Illustration 32 g01301341
Illustration 33 g01301241
Press the Soft Key that is located next the "Finish" Soft Key Label.The AccuGrade System will update the information. Refer to Illustration 32.You will be returned to the "Calibrate Sensors" window. Refer to Illustration 33.
End of Procedure"Linked EM400C Calibration"
To carry out a calibration for the EM400C Electric Mast, complete the following steps:
In the "Setup Menu - Configuration" screen, scroll to "Calibrate Sensors". Press "OK".A screen that is similar to Illustration 34 will appear.
Illustration 34 g01373999
In the "Calibrate Sensors" screen, scroll to "Linked EM400C Calibration". Press "OK".A screen that is similar to Illustration 35 will appear.
Illustration 35 g01373993
Illustration 36 g01374008
Press the Hard Key that is adjacent to the Soft Key with the arrow.The AccuGrade System will begin calibrating the masts. Refer to Illustration 36.A screen that is similar to Illustration 37 will appear.
Illustration 37 g01374014
Level the laser transmitter.
Level the blade.
Illustration 38 g01374018
Illustration 39 g01374052
Press "OK" in order to begin the calibration.A "Calibrating Mast Elevations..." message will appear on the screen. Refer to Illustration 38.When the AccuGrade System is finished calibrating the electric masts a screen that is similar to Illustration 39 appears.
Press the Hard Key that is adjacent to the "Finish" Soft Key.The Display will return to the "Calibrate Sensors" screen.