KIT-ENGINE GASKET 4731310 - Caterpillar

Illustration 21 g01246649
Install the components that are listed in Table 9. Refer to Illustration 21. Check the lateral clearance of the stick. The maximum lateral clearance should be 1.6 mm (.0630 inch).
Illustration 22 g01246665
Illustration 23 g01246664
Install 246-7436 Lighting Harness As (22) for the stick. Assemble connector (24) that is located on the back of the 219-6485 Flood Lamp Gp (21). Connect harness assembly (22) to the back of the lights. Connect clips (23). Connect the Front Lines
Table 10
284-9621 Front Lines Gp    
Qty     Part Number     Description     Item Number    
1     5K-9090     O-Ring Seal     1    
3     3D-2824     O-Ring Seal     1    
3     6V-8637     Connector     1    
3     6V-9746     O-Ring Seal     1    
1     6V-8635     Connector     1    
1     7M-8485     O-Ring Seal     1    
1     246-7437     Valve As     1    
3     8T-4223     Hard Washer     1    
3     8T-4648     Bolt     1    
1     261-1432     Hose As     2    
1     261-1436     Hose As     3    
1     261-1439     Hose As     4    
1     261-1440     Hose As     5    
1     261-1441     Hose As     6    
1     261-3382     Hose As     7    
1     261-3577     Hose As     8    
1     261-7177     Hose As     9    
2     261-7178     Hose As     10    
Illustration 24 g01246447
Install the components that are listed in Table 10 to the main control valve. Refer to Illustration 24.Note: The hoses have already been installed onto the boom.