KIT-DT GASKET 4734418 - Caterpillar

Bucket Lift Lever
Float (1) - Push the lever all the way forward into detent, for FLOAT. The bucket will lower to the ground, and move up and down, following the ground contour.The lever will remain in FLOAT until pulled out of detent. The lever will then return to HOLD when released.
NEVER use FLOAT position to lower a loaded bucket. Machine damage can result from bucket falling fast.
Lower (2) - Push the lever forward to lower the bucket. The lever will return to HOLD when released. Hold (3) - The lever will return to HOLD when released from either RAISE or LOWER. The bucket will remain in the position it is in. Raise (4) - Pull the lever back to raise the bucket. Release the lever to stop lifting the bucket. The lever will return to HOLD when released.The lever is detented in the full raise position. It will stay in detent until the bucket reaches height set by the lift kickout. Then it returns to HOLD.Bucket Tilt Lever
Dump (1) - Push the lever forward to dump the bucket. Hold (2) - Release the tilt lever. The bucket will remain in the position it is in. Tilt Back (3) - Pull the lever back to tilt the bucket back.The lever is detented in full tilt back position. It will stay in detent until the bucket reaches the preset angle set by the kickout. Then it returns to HOLD.