KIT-ROD 4759795 - Caterpillar

Removal Procedure
Personal injury can result from failure to disconnect the battery.First, disconnect the negative battery cable. Then, disconnect the positive battery cable.A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g01695093
Remove bolts (1) and remove guard (2) .
Put an identification mark on the harness assemblies that are connected to the alternator for installation purposes. Disconnect the harness assemblies from the alternator.
Illustration 2 g01695114
Loosen nuts (9) on adjustment rod (10) .
Loosen the nut on bolt (5). Push the bottom of the alternator toward the cylinder block. Remove the V-belt from the alternator pulley.
Remove bolt (5) and bolt (8). Remove alternator (6) .
Remove nut (7) and the alternator pulley from the alternator.
Remove nuts (3) and remove bracket (4) .Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     155-0695     Thread Lock Compound     -    
Illustration 3 g01695114
Install the alternator pulley and nut (7). Tighten the nut to a torque of 102 7 N m (75 5 lb ft).
Position bracket (4) in position on the studs. Apply Tooling (A) to the threads of the studs. Install nuts (3) and tighten to a torque of 70 5 N m (52 4 lb ft).
Put alternator (6) in position on bracket (4) and install bolt (5) .
Put adjustment rod (10) in position on the alternator and install bolt (8) .
Install the V-belt. Tighten the V-belt. Refer to Testing and Adjusting, "Belt Tension Chart".
Tighten nuts (9) to a torque of 30 15 N m (22 11 lb ft).
Connect the harness assemblies on the alternator. Tighten the nuts. Refer to Specifications, "Alternator" for the torque values.
Illustration 4 g01695093
Position guard (2) and install bolts (1) .
Turn the battery disconnect switch to the ON position.