KIT-REGULATOR 4790581 - Caterpillar

Fuel Level (12) - The fuel level gauge indicates the amount of fuel that remains in the fuel tank. A gauge needle in the red zone indicates a low fuel level.
Torque Converter Oil Temperature (13) - The gauge indicates the temperature of the oil in the torque converter. If the gauge needle enters the red zone the oil temperature is excessive. The Advisor Panel will display a warning. Increased temperatures will sound the warning alarm. If necessary, reduce the load that is on the machine until the torque converter oil temperature decreases.
Running out of fuel can cause engine damage. Do not continue to operate the machine when critically low on fuel.
Digital Display Window
Illustration 4 g02680317The digital display window (14) provides readouts that show the following items:
Operational hours (service hours)
Selected gear and direction
Engine Speed or Ground Speed Service Hour Meter - This display indicates the total operating hours of the engine. Use the display in order to determine the service hour maintenance intervals.Advisor Display
Illustration 5 g03168757The Advisor screen displays the following information:
Service hours
Diagnostics and events
System software version
Service parameter valuesNote: Advisor display settings can be modified to accommodate operator preferences.Digital display area (15) - The Advisor system shows information on this digital display area.Scroll up/left (16) - This button is used to scroll up through information that is shown on the display area. The button can also be used to scroll to the left through information that is shown on the display area.Scroll down/right (17) - This button is used to scroll down through information that is shown on the display area. The button can also be used to scroll to the right through information that is shown on the display area.Previous (18) - Use this button to return to information that was previously shown on digital display area (15).Home (19) - Use this button to return to the "Home" menu.OK (20) - After you have made selections with the scroll down/right button (17) and with the scroll up/left button (16), use this button in order to confirm those selections.Blade Response - The speed of raising the blade and lowering the blade as related to movement of the control lever can be selected by the operator on this machine.Select the desired level of Blade Response in Advisor by using the following procedure:
Press and release the Home button to display "Home Menu".
Select "Settings" from "Home Menu" and press the OK button.
Select "Operator Config" from the "Settings" menu and press the OK button.
Select "Blade Response" from the "Settings:Operator Config" menu and press the OK button.
Select the desired level of Blade Response from the "Settings:Blade Response" menu and press the OK button. For detailed information on the Advisor system, refer to Systems Operation, Troubleshooting, Testing and Adjusting, UENR2421, "854K Wheel Dozer and 992K and 993K Wheel Loaders Monitoring System".Functional Test
To ensure the proper operation of the monitoring system, check the system daily.The battery disconnect switch must be in the ON position.When you turn the engine start switch key from the OFF position to the ON