KIT-BEARING 4804491 - Caterpillar

Removal Procedure
Illustration 1 g03746689
Open door (1).
Illustration 2 g03746736
Disconnect harness assembly (2) and solenoid valves (3).
Illustration 3 g03746792
Disconnect tube assemblies (4).
Illustration 4 g03746816
Remove bolts (6) and remove fuel manifold (5).
Illustration 5 g03746829
Remove adapter assemblies (7). Remove sensors (9).
Remove cap (10) and remove connector assembly (8).
Illustration 6 g03746836
Remove nut (15 ), washer (14), and solenoid (13).
Remove cartridge assembly (12) and remove O-ring seals (11). Installation Procedure
Install fuel manifold (5) in the reverse order of removal.
Tighten nut (15) to a torque of 20 2.5 N m (177 22 lb in).
Tighten solenoid valves (3) to a torque of 50 5 N m (37 4 lb ft).
Tighten connector assembly (8) to a torque of 30 3 N m (266 27 lb in).
Tighten cap (10) to a torque of 7.0 2.5 N m (62 22 lb in).
Tighten sensors (9) to a torque of 30 3 N m (266 27 lb in).
Tighten adapter assemblies (7) to a torque of 17 1.5 N m (150 13 lb in).