KIT- 4929228 - Caterpillar

Illustration 1 g00512839
Install spool (20), spring (19) and plug (18) .
Illustration 2 g00512780
Use Tooling (A) to install lip seal (16) in the pump body. Install the sealing lip toward the inside of the pump body.
Illustration 3 g00512463
Heat the bearing to 135 °C (275 °F). Install the bearing and snap ring (15) on the shaft.
Illustration 4 g00512461
Install the shaft and bearing assembly (14) in pump body (8) .
Illustration 5 g00512460
Install snap ring (13) .
Illustration 6 g00512456
Install O-ring seal (12) in pump body (8) .
Illustration 7 g00512449
Install 12 vanes (11) in the rotor.
Illustration 8 g00512408
Install rotor assembly (10) and two pins (9) in cartridge assembly (7) .
Illustration 9 g00512373
Illustration 10 g00512371
Assemble cartridge assembly (7) and pump body (8) .
Illustration 11 g00512368
Use Tooling (A) to install bushing (6) in plate assembly (3) .
Illustration 12 g00512338
Illustration 13 g00512336
Note: Align the pins with the holes in plate assembly (3) .
Install plate assembly (3), O-ring seal (4), and spring (5) .
Illustration 14 g00512984
Install cover assembly (2) .
Illustration 15 g00512259
Install four bolts (1). Tighten the bolts to a torque of 108 7 N m (80 5 lb ft).End By: Install the fan drive pump. Refer to Disassembly and Assembly, "Vane Pump (Hydraulic Fan) - Install".