KIT-BEARING 4N8527 - Caterpillar

Seat Heater (18)
Preexisting skin conditions can be aggravated by continued use of the seat heater. If skin condition worsens, discontinue use of the seat heater.
If equipped, the switch for the seat heater is located on the right console.
Seat Heater - In cold weather, the seat heater can be activated in order to improve operator comfort.
ON - Push down on the top of the seat heater switch in order to activate the seat heater.
OFF - Push down on the bottom of the seat heater switch in order to deactivate the seat heater.
Do not leave any heavy item or object with a sharp point on the seat.Do not cover the seat or seat back with a blanket, seat cushion or any other similar covering. The seat heater can be over heated. Be sure to remove any spills on the seat and thoroughly dry the spill.
Note: The thermostat in the seat heater deactivates when the temperature in the cab is above 10°C (50°F). The seat heater will not operate when the thermostat is deactivated.Fine Swing Control (19)
If equipped, the switch for the fine swing control is located on the right console.
The Fine Swing Control delays the engagement of the swing parking brake.If the machine is operating on a slope with the Fine Swing Control in the ON position, the swing motion may become uncontrollable which could result in property damage, personal injury or death.Turn the Fine Swing Control to the OFF position when the machine is operating on a slope.
Fine Swing Control - If equipped, push down on the top of the switch in order to activate the fine swing control.When the fine swing control is ON, the swing parking brake will not activate until 6.5 seconds after the joystick control for the swing function returns to the neutral position. This improves swing control during deceleration of a swing because this will allow the swing to drift instead of stopping the swing abruptly. This combination of drift and the delay of the engagement of the swing parking brake may be helpful during certain types of lifting operations.Push down on the bottom of the switch in order to turn off the fine swing control. Operate the machine with the fine swing control in the OFF position when the machine is on a slope. Operate the machine with the fine swing control in the OFF position when great swing forces are required. For example, digging on a sidewall requires great swing force. Operate the machine with the fine swing control in the OFF position in order to control the motion with the swing brake.Overload Warning Device (20)
If equipped, the switch for