4W5817 KIT-PISTON RINGS Caterpillar parts
214
Rating:
Alternative (cross code) number:
CA4W5817
4W-5817
4W5817
CA4W5817
4W-5817
4W5817
EXCAVATOR,
Compatible equipment models: 4W5817:
Information:
Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00784230
Install air valve (19) into carburetor body (1). Turn over carburetor body (1) and install diaphragm (16), plate (17), and screws (18).
Illustration 2 g00784226
Install shaft (15) and O-ring seal (14).
Illustration 3 g00784223
Install piston (13), piston plate (12), O-ring seal (10), and screws (11).
Illustration 4 g01423413
Install gas valve (7). Install screw (6) and the lockwasher . Install jet (9) and O-ring seal (8).
Illustration 5 g00784206
Install spring (5).
Illustration 6 g00784200
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Install cover (4). Install screws (3) and the lockwashers .
Illustration 7 g00784147
Install carburetor body (1). Install screws (2) and the lockwashers . If necessary, install a new gasket. End By:
Install the carburetor. Refer to Disassembly and Assembly, "Carburetor - Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00784230
Install air valve (19) into carburetor body (1). Turn over carburetor body (1) and install diaphragm (16), plate (17), and screws (18).
Illustration 2 g00784226
Install shaft (15) and O-ring seal (14).
Illustration 3 g00784223
Install piston (13), piston plate (12), O-ring seal (10), and screws (11).
Illustration 4 g01423413
Install gas valve (7). Install screw (6) and the lockwasher . Install jet (9) and O-ring seal (8).
Illustration 5 g00784206
Install spring (5).
Illustration 6 g00784200
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Install cover (4). Install screws (3) and the lockwashers .
Illustration 7 g00784147
Install carburetor body (1). Install screws (2) and the lockwashers . If necessary, install a new gasket. End By:
Install the carburetor. Refer to Disassembly and Assembly, "Carburetor - Install".
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
0676987
KIT-ELEMENT
206, 214, 3003, 3011C, 3013, 3013C, 3014, 3024, 3024C, 3034, 3054, 3056, 426, 428, AP-1200, AP-800, C1.1, C1.5, C1.6, C2.2, CB-334D, CB-335D, CB-424, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B...
206, 214, 3003, 3011C, 3013, 3013C, 3014, 3024, 3024C, 3034, 3054, 3056, 426, 428, AP-1200, AP-800, C1.1, C1.5, C1.6, C2.2, CB-334D, CB-335D, CB-424, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B...
8A2250
KIT (Includes 5 Piston rings)
120G, 214, 518, 528, 920, 930, 950, 950B, D6C, G936
120G, 214, 518, 528, 920, 930, 950, 950B, D6C, G936
1059236
KIT-PISTON RING
120G, 214, 518, 528, 920, 930, 950, 950B, D6C, G936
120G, 214, 518, 528, 920, 930, 950, 950B, D6C, G936
7W4830
KIT-HOSE
214
214
7C2837
KIT-COMPRESSOR
214, 224
214, 224
7T9766
KIT (SEAL)
215B, 225, 350, 375, 375 L, 5080, 5110B, 5130, 5130B, 5230, 5230B, 539, 988H, 988K, 990K, 992K, 993K, 994F, 994H, D11R
215B, 225, 350, 375, 375 L, 5080, 5110B, 5130, 5130B, 5230, 5230B, 539, 988H, 988K, 990K, 992K, 993K, 994F, 994H, D11R
7W4835
KIT-HOSE
224
224
7W4787
KIT-HOSE
224
224
7W4788
KIT-HOSE
224
224
7W4579
KIT-LIFT PUMP
214, AP-1200
214, AP-1200