KIT-RAIL 5016623 - Caterpillar

Illustration 13 g06332926
Select Valve Calibrations.
Select Start at the bottom of the screen..
Illustration 14 g06310189
Select Begin to start the valve calibration.Note: To calibrate only one of the individual valves select Clear All and select the desired valve to calibrate by clicking on the required calibration.
Illustration 15 g06332928
Select Next on the bottom of the screen and, then follow the Steps.
Illustration 16 g06310500
The Calibrations Successful screen will appear when the implement raise valve calibration is complete.
Select Continue to complete the remaining valve calibrations.
Illustration 17 g06310495
The Calibrations Successful screen will appear when implement valve calibrations are complete.
Select Finish to complete valve calibrations.Transmission ECM Calibrations Procedure
Neutralization Setpoint and Pedal Calibration
Illustration 18 g06310518
Connect the laptop computer to the service connector in the cab.
Start and run the engine at idle rpm.
Illustration 19 g06310516
Open software program Cat ET. Select the Service tab from the ECM selector menu.
Select the Calibration tab. and then, select the Transmission ECM.
Illustration 20 g06310511
From transmission drop down option select Neutralization Setpoint and Pedal Calibration and select Next..
Illustration 21 g06332957
Perform the set up instructions on the screen and then, follow the Steps.
Illustration 22 g06332959
The Calibration Successful screen will appear when the neutralization setpoint and pedal calibration is complete.
Select Finish to complete calibration procedure.Transmission Fill Calibration
Illustration 23 g06310518
Connect the laptop computer to the service connector in the cab.
Illustration 24 g06310516
Open software program Cat ET. Select the Service tab from the ECM selector menu.
Select the Calibration tab. and then, select the Transmission ECM.
Illustration 25 g06332962
From transmission drop down option select Transmission Fill Calibration and select Next.
Illustration 26 g06310515
Perform the set up instructions on the screen.