KIT-COMPUTER 5143041 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Illustration 1 g06304196Reports have been received that the cable assembly in the transport lock group gets broken on the machines listed above.Solution
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Table 1
Required Parts List
Item New Part Number Part Name
1 8T-4138 Bolt
2 214-7043 Spacer
3 478-0337 Cable As
Illustration 2 g06304179
Typical example
Transport lock group
(1) 8T-4138 Bolt
(2) 214-7043 Spacer
(3) 478-0337 Cable AsIn the event of failure, replace the bolt (1), spacer (2) and cable assembly (3) with the same part number.Retain the failed parts including spacer and bolt, check "Send It Back" for an open parts return request. Additional information regarding the failure and effective interim repair can be submitted to the CPI team through CPI feedback function within Service Information Management System (SIMSi).After the replacement of cable assembly, follow the instructions given below:
Illustration 3 g06304996
Incorrect fitment
Illustration 4 g06304987
Correct fitment
Ensure the lock cable do not have any snag to avoid strain on the cable. Refer to Illustration 3 and Illustration 4.
Apply grease over the spacer area (A) to create a free rotation on the cable joint.
Submit the failed cable images and the images after the new cable installation into the SIMSi failure report.