KIT-CONTACT 5143153 - Caterpillar

Illustration 1 g06333924
Table 1
Item Qty Part Specification Description
1 2 286-7166 Bushing Before assembly, the inner diameter is 50.302 0.020 mm (1.9804 0.0008 inch).
2 2 8T-4194 Bolt Before assembly, apply red Loctite 263 to the threads.
3 4 272-1613 Bushing Before assembly, the inner diameter is 75.342 0.020 mm (2.9662 0.0008 inch).
4 2 9R-4062 Bushing Before assembly, the inner diameter is 60.315 0.020 mm (2.3746 0.0008 inch).
5 As required, use the following shim in order to adjust the wedge pads to obtain the maximum gap of 0.5 to 1.0 mm (0.02 to 0.04 inch):
6 287-5667 Shim Thickness is 1.0 mm (0.04 inch).
6 2 8T-4648 Bolt Before assembly, apply red Loctite 263 to the threads.
7 14 8T-4121 Hard Washer As required, use the hard washer of thickness of 2.5 mm (0.10 inch) in order to obtain the maximum gap of 2.5 mm (0.10 inch) between the hard washer and stick.
8 1 217-0055 Pin Diameter is 25.2 0.3 mm (0.99 0.01 inch).
9 - - Special design characteristic:
Bucket boss must be parallel to boom boss within 2.0 mm (0.08 inch).
10 As required, use the following shim in order to adjust the wedge pads to obtain the maximum gap of 0.5 to 1.0 mm (0.02 to 0.04 inch):
4 293-9884 Shim Thickness is 0.25 mm (0.010 inch).
4 233-5166 Shim Thickness is 0.50 mm (0.020 inch).
4 293-9882 Shim Thickness is 1.00 mm (0.040 inch).
12 233-5167 Shim Thickness is 2.00 mm (0.080 inch).
11 1 214-6143 Pin Diameter is 34.966 to 35.024 mm (1.3766 to 1.3789 inch).
12 1 270-7865 Pin Diameter is 49.95 to 50.00 mm (1.967 to 1.968 inch).