KIT- 5148065 - Caterpillar

When Required
Engine Air Intake System - Service filters 76 Fuel System - Service when loss of power 107 Cooling System - Replace coolant if dirty 121 Circuit Breakers - Reset 78Every 4 Service Hours or Twice Daily
Drag Conveyors - Lubricate the fittings 79 Screw Conveyors - Lubricate the fittings 80 Quick Hitch Beam Assembly (If Equipped) - Lubricate the fittings 80Every 20 Service Hours or Daily*
Engine Oil - Check oil level 81 Hydraulic System - Check oil level 82 Radiator - Check the coolant level 82 Hydraulic Oil Cooler - Inspect core 83 Walk-Around Inspection - Inspect machine 84 Seat Belt - Inspect 86 Indicators and Gauges - Test 86 Back-up Alarm - Test 87 Hopper Pins - Lubricate the fittings 87Initial 50 Service Hours
Conveyor Drive Chains - Adjust 102 Ground Drive Chains - Adjust 103 Drag Conveyor Chains - Adjust 103 Conveyor Gearboxes - Change oil on new or rebuilt units only 111 Wheel Nuts - Retorque 50 Drive Sprockets - Retorque 89 Tow Arm Joint - Retorque 89Every 50 Service Hours or Weekly*
Engine Air System - Check intake and exhaust systems 90 Fuel Tank - Drain water and sediment 90 Suspension - Lubricate the fittings 91Every 100 Service Hours or 2 Weeks*
Pump Drive Gearbox - Check oil level 92 Differential - Check the oil level 92 Axles - Check the oil level 93 Transmission - Check the lubricant level 93 Conveyor Gearboxes - Check oil level 94Initial 250 Service Hours
Engine Valve Lash - Adjust on new or reconditioned engines at first oil change only 120Every 250 Service Hours or Monthly*
Engine Oil and Filter - Change. If the sulfur content in the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half 95 Cooling System - Add coolant additive 96 Fuel System - Drain water separator, purge air 97 Belts - Inspect/adjust 100 Feeder Gates - Lubricate the fittings 101 Park Brake Cylinder - Lubricate the fittings 102 Conveyor Drive Chains - Adjust 102 Ground Drive Chains - Adjust 103 Drag Conveyor Chains - Adjust 104 Batteries - Inspect 105 Transmission Speed Selection Lever - Lubricate the fittings 106Every 500 Service Hours or 3 Months*
Fuel System - Clean lift pump chamber, clean/change filters 107 Fuel Tank Cap and Fill Screen - Clean 109 Differential Cooling System - Test operation 109Every 1000 Service Hours or 1 Year*
Fuel Tank Breather - Clean 110 Pump Drive Gearbox - Change oil, clean breather 110 Conveyor Gearboxes - Change oil 111 Transmission - Change oil, clean breather 112 Hydraulic System - Change oil and filters 113 Differential - Change oil 116 Axles - Change the oil 117 Front Wheel Bearings - Clean and repack 118 Drive Wheel Bearings - Clean and repack 119Every 2000 Service Hours or 1 Year*
Engine Valve Lash - Adjust 120Every 3000 Service Hours or 2 Years*
Cooling System Coolant - Change 121*First Perform Previous Service Hours Items. Follow Service Hour or Calender Intervals, Whichever Comes First.