KIT-GASKET 5166861 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-6080 Torque Multiplier 1
5P-1748 Socket 1
Illustration 1 g03858195
Remove bolts (1), bolts (2), bolts (4), and cover (3).
Disconnect speed sensors (5).
Illustration 2 g03858298
Remove housing (6), bolts (7), speed-timing wheel (8), and spacer (9).
Illustration 3 g03858437
Remove the timing pins from the crankshaft and camshaft.
Use Tooling (A) to remove bolt (13) and washer (14). Note: Lock the manual barring group to prevent the engine from rotating when bolt (13) is loosened.
Remove bolts (11) and plate (12).
Place washer (14) between the camshaft and plate (12), and install bolt (13). Note: Ensure that bolt (13) is installed in order to hold camshaft drive gear (10) while being pulled off the taper of the camshaft.
Tighten bolts (11) evenly to pull the camshaft drive gear (10) off the taper of the camshaft.
Attach a suitable lifting device to camshaft drive gear (10). The weight if camshaft drive gear is approximately 41 kg (90 lb).
Remove bolts (11), bolt (13), plate (12), washer (14) and camshaft drive gear (10).