KIT- 5173656 - Caterpillar

1. Remove three hollow screws (1).2. Remove cover (2). 3. Remove bolt (3) and P-clamp.4. Remove two bolts (4).5. Lift trunnion and shaft assembly (5) out of the way. The end gate and extension (if equipped) have been removed for photographic purposes only. 6. Attach strap and a suitable lifting device to drop arm bracket assembly (6) as shown.7. Remove hollow screw (7).8. Remove pivot pin assembly (8). Bolt (11) may have to be loosened to remove pivot pin assembly (8).9. Carefully lift the bracket assembly away from the screed. The weight of the bracket assembly is 95 kg (210 lb).10. If necessary, remove two spacers (9) from bracket assembly (6).11. If necessary, remove pipe assembly (10). For installation of the drop arm bracket assembly, reverse the removal steps.End By:a. install screed