KIT-SEAL 5187949 - Caterpillar

Remove clip (19) and hard washer (3) from hose assembly (17) .
Remove hose assembly (17) from elbow assembly (8). Remove the elbow assembly from the engine.
Remove hose assembly (18) form elbow (20). Remove the elbow with o-ring seal (21) from the engine.
Illustration 4 g03857852
(1) 9X-6772 Cable Straps (12) 2V-8571 Hose As (13) 5P-4295 Clip (14) 9X-6458 Hard Washer (15) 0S-0509 Bolt (16) 174-7088 Hose As
Remove strap (1), clip (13), bolt (15), and hard washer (14) .
Remove hose assembly (12) and hose assembly (16) from the engine.Installation Procedure
Illustration 5 g03857863
(1) 478-0108 Hose As (2) 478-0107 Hose As (3) 115-8082 Bracket As (4) 0S-1594 Bolt (5) 9X-6458 Hard Washers (6) 5B-0693 Bolt (7) 8T-1897 Clip (8) 8T-1898 Clip (9) 353-7952 Grommet
Install hose assembly (1) and hose assembly (2) onto the engine.
Install bracket assembly (3) using bolt (4) with hard washer (5) .
Install grommet (9) onto hose assembly (1). Install clip (7) and clip (8) using bolt (6) with hard washer (5) .
Illustration 6 g03857907
(1) 478-0108 Hose As (2) 478-0107 Hose As (10) 424-3585 Hose As (11) 281-5975 Elbow As (12) 6V-9845 Swivel Tee (13) 228-7091 O-Ring Seals (14) 281-5975 Elbow As
Install elbow assembly (14) in the location shown in Illustration 6.
Install elbow assembly (11) with swivel tee (12) and two o-ring seals (13) as shown above.
Install hose assembly (10) between the elbow assembly and swivel tee.
Illustration 7 g03857920
(5) 9X-6458 Hard Washers (7) 8T-1897 Clip (8) 8T-1898 Clip (9) 353-7952 Grommet (14) 281-5975 Elbow As (15) 480-5509 Hose As (16) 480-5510 Hose As (17) 281-5975 Elbow As
Install elbow assembly (14) and elbow assembly (17) in the locations shown in Illustration 7.
Install hose assembly (15) and hose assembly (16) .
Install grommet (9) on hose assembly (15). Install clip (7) and clip (8) onto the grommet with hard washers (5) .
Illustration 8 g03858011
(5) 9X-6458 Hard Washers (18) 310-4948 Clip (19) 310-4947 Clip (20) 3G-8047 Grommet (21) 0S-1588 Bolt (22) 0S-1590 Bolt (23) 480-5511 Bracket (24) 144-8976 Spacer (25) 7K-1181 Cable Strap (26) 290-5562 Mount
Install grommets (20) on the hose assemblies.
Install clip (18) and clip (19) onto the grommets.
Secure the clips on the left using bolt (21) with hard washer (5) .
Secure the clips on the right using bolt (21) with hard washer (5) .
Install bracket (23) on the left using bolt (22), spacer (24), and hard washer (5) .
Install mount (26) using two cable straps (25) in the location shown in Illustration 8.