KIT-MOTOR 5283191 - Caterpillar

Illustration 1 g00819857
Typical example
(1) Height of the camshaft lobe for the inlet and exhaust valvesC0.5 and C0.7 ... 26.955 to 27.010 mm (1.0612 to 1.0634 inch)Service limitC0.5 and C0.7 ... 26.5 mm (1.0433 inch) (2) Height of the camshaft lobe for the fuel injection pumpC0.5 and C0.7 ... 39.900 to 40.100 mm (1.5709 to 1.5787 inch)Service limitC0.5 and C0.7 ... 39.8 mm (1.5669 inch) (3) Height of the camshaft lobe for the fuel transfer pumpC0.5 and C0.7 ... 27.900 to 28.000 mm (1.0984 to 1.1024 inch)Service limitC0.5 and C0.7 ... 27.0 mm (1.0630 inch)
Illustration 2 g00295323
Typical example
(A) Actual camshaft lobe lift (B) Height of the camshaft lobe (C) Base circleTo determine the lobe lift, use the procedure that follows:
Measure the height of the camshaft lobe (B).
Measure the base circle (C).
Subtract the base circle that is found in Step 2 from the height of the camshaft lobe that is found in Step 1. The difference is the actual camshaft lobe lift.
Illustration 3 g01297670
Typical example
(4) Tighten the setscrews for the retainer plate for the camshaft to the following torque. ... 11 N m (97 lb in) (5) Retainer plate for the camshaft. (6) Camshaft gear.