KIT 5294020 - Caterpillar

Table 1
Contents of the "Operator" Menu    
"Select Operator"     This option allows the user to select a profile that has already been entered into the onboard system. When a profile is chosen, the settings for that profile will become the current settings. The system will be configured with the default profile that was set at the factory.    
"Save Current"     This option allows the user to save the current settings to the selected profile. The user will be prompted for a confirmation before the settings are saved. The default profile may not be overwritten.    
"Add Operator"     This option allows the user to create a new profile by using the onboard system. After choosing a name for the profile, the user will be given the option of saving the default settings or the current settings.    
"Delete Operator"     This option allows the user to delete a profile and the associated settings.    
Table 2
Contents of the "Service" Menu    
Diagnostics    
"MID"     Module Identifier    
"CID"     Component ID/Failure Mode ID    
"Occ"     Number of Occurrences    
"First"     First occurrence of the Service Hour    
"Last"     Last occurrence of the Service Hour    
"Act"     The item is marked with an "X" if the occurrence is active.    
Table 3
Contents of the "Settings" Menu    
Calibrations    
"Left Station Propel Lever Neutral"     Propulsion    
"Right Station Propel Lever Neutral"     Propulsion    
"Steering Cylinder Sensor"     Propulsion    
"Left Station Steering Wheel"     Propulsion    
"Right Station Steering Wheel"     Propulsion    
"Left Material Height Sensor"     Feed of Material    
"Right Material Height Sensor"     Feed of Material    
"Left Auger Current"     Feed of Material    
"Right Auger Current"     Feed of Material    
"Left Conveyor Current"     Feed of Material    
"Right Conveyor Current"     Feed of Material    
"EDC Forward Currents"     Propulsion    
"EDC Reverse Currents"     Propulsion    
"Tamper Bar Initial, Medium, & Maximum Currents"     Auxiliary    
Vibratory Minimum and Maximum Currents of the Motor     Auxiliary    Note: The availability of the calibrations that are listed above is dependent on the model of the machine that is being calibrated.