KIT-CYLINDER 5363860 - Caterpillar

Illustration 1 g00637626
Service Tool Connector at the Fuse Panel
Illustration 2 g00637630
Location of The Implement ECM (1) Harness connector J1 (2) Harness connector J2The implement ECM is located in the right console behind the access cover and the seat is removed. The harness connectors J1 and J2 are fastened to the ECM by using an integral hex socket head screw. A 4.00 mm hex key wrench is used to turn the screw. Tighten the screw to 6 1 N m (53 9 lb in), when the connector is attached to the ECM. Use the Electrical System Schematic, the Parts Manual and the Operation and Maintenance Manual for the machine that is being serviced in order to locate the electrical components and the connectors.
Illustration 3 g00554751
Implement Electronic Control Module (ECM)
Illustration 4 g00556522
Machine Harness Connectors J1 and J2