KIT-REPAIRING 5364130 - Caterpillar

Illustration 1 g00656474
Schematic of the Fuel Level SensorThis diagnostic code is recorded when the ECM reads the signal of the sensor and the signal of the sensor is above normal. The possible causes of this failure are listed below:
The sensor has failed.
The supply circuit of the sensor is open in the machine harness.
The signal circuit in the machine harness is shorted to +battery.
The signal circuit in the machine harness is open or the sensor is disconnected.
The ECM has failed. This is unlikely.System Response:This diagnostic code causes the fuel gauge to always indicate that the fuel tank is empty. This failure may also cause the fuel gauge to intermittently indicate that the fuel tank is empty. Test Step 1. CHECK THE ELECTRONIC CONTROL MODULE AND THE HARNESS.
Turn the