KIT- 5452428 - Caterpillar

Illustration 9 g02644837
Illustration 10 g02644619
Remove set screw (13). Use Tooling (B) (not shown) to remove valve assembly (12).
Illustration 11 g02644620
Remove O-ring seals (14). Installation Procedure
Illustration 12 g02644620
Apply Tooling (C) to O-ring seals (14). Install O-ring seals (14).
Illustration 13 g02644619
Illustration 14 g02644837
Use Tooling (B) (not shown) to install valve assembly (12) into housing. Tighten valve assembly (12) to a torque of 5 2 N m (44 10 lb in). Install set screw (13).
Illustration 15 g02644839
Slide valve assembly (12) on the filter housing. Orientate the face of housing level with the filter housing Location (X).
Illustration 16 g02644618
Install bolts (11). Tighten bolts (11) to a torque of 5 2 N m (44 10 lb in).
Illustration 17 g02644614
Illustration 18 g02646264
Illustration 19 g02644616
Apply Tooling (C) to O-ring seals (15) and install O-ring seals (15). Install Tooling (A) to oil filter assembly (10). Install filter housing into the tank. Align with previous orientation. Install bolts (9). Tighten bolts (9) to a torque of 50 10 N m (37 7 lb ft).
Illustration 20 g02644611
Apply Tooling (C) to O-ring seal (7) and pipe (6). Install O-ring seal (7). Install pipe (6).
Illustration 21 g02647229
Illustration 22 g02644608
Apply Tooling (C) to O-ring seal (16). Install O-ring seal (16). Install flange (4). Tighten bolts (5) to a torque of 50 10 N m (37 7 lb ft). Connect harness assembly (3).
Illustration 23 g02644606
Install flange (1). Install clamp (2).
Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for draining and filling procedures.