KIT-SWITCH 5460926 - Caterpillar

Activity code - This icon displays the activity code that is selected by the operator. The activity code is selected from the options that are provided in the activity code file that is sent by the office to the onboard system.
Job time - This icon displays the running time of a selected job code. The time is calculated by the onboard system. The time is reset when a new job code is selected.
Activity time - This icon displays the running time of a selected activity. The time is calculated by the onboard system. The time is reset when a new activity code is selected.
Current recipe - This icon displays the recipe provided by the office. The current recipe functionality is used for stock pile blending into a crusher.
TKPH front - This icon displays the current measurement for the Ton Kilometer per Hour (TKPH) for the front tires. This value is determined by information from VIMS.
TKPH rear - This icon displays the current measurement for the TKPH for the rear tires. This value is determined by information from VIMS.
TKPH front warn - This icon displays a warning if the TKPH for the front tires has exceeded a pre-configured threshold. The value that is displayed is either zero or one. Where the value of one means that a warning is activated. The threshold is configured in VIMS.
TKPH rear warn - This icon displays a warning if the TKPH for the rear tires has exceeded a pre-configured threshold. The value that is displayed is either zero or one. Where the value of one means that a warning is activated. The threshold is configured in VIMS.
TKPH speed limit - To avoid damage to the tires of the truck, this icon displays the maximum speed for the truck. This value is determined by information from VIMS.
Table 1
System Information Icon Identification for TopeWinCfg.txt file
Item Name ID
Time 0
GPS Accuracy 1
Position X (East) 2
Position Y (North) 3
Position Z (Elevation) 4
Heading 5
Pitch 6
Roll 7
Shift Distance 8
Shift Weight (Total Payload) 9
Shift Weight Expected 10
Fleet Weight 11
Fleet Weight Expected 12
Route Distance 13
Route Time 14
Route Distance Expected 15
Route Time Expected 16
Segment Distance 17
Segment Time 18
Segment Distance Expected 19
Segment Time Expected 20
Segment Speed Limit 21
Trip Time 22
Trip Distance 23
Trip Weight 24
Material Type 25
New Message 26
Trip Loads 27
Shift Loads 28
Fleet Loads 29
Weight 30
Cycles 31
Cycles Expected 32
Material Required 33
Truck ID 34
Truck Name 35
Truck Driver 36
Truck Tons (Payload Current) 37
NSV (Number of visible satellites) 38
Speed 39
Direction 40
Stopped 41
Gear 42
Loader Name 43
Loader ID 44
Operator Name 45
Operator ID 46
Latitude 47
Longitude 48
Altitude 49
Job Code 50
Activity Code 51
Job Time 52
Activity Time 53
Curblock 54
Recipe 55
TKPH Front 56
TKPH Rear 57
TKPH Front Warn 58
TKPH Rear Warn 59
TKPH Speed Limit 60
TIM 61
Speed Limit 62