KIT-PLUG 5501179 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 3554059 SENSOR AS-LEVEL
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 4% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Replace the existing 308-3674 Level Sensor with new 355-4059 Level Sensor.
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-1000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
1001-2000 hrs,
25-36 mo 100.0% 0.0% 0.0% 0.0% 0.0% 100.0%
This is a 1.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
1. Isolate the generator set before commencing any work on the unit, open the generator set breaker, activate the emergency stop, disconnect the auxiliary power supply for the battery charger and heaters, and disconnect the battery cables. Ensure health and safety requirements are adhered to at all times. Also, ensure proper Lock Out-Tag Out procedures are followed at all times while work is being performed on the machine. Lock out generator before commencing any type of work.
2. Drain coolant to below the level of the coolant sensor
3. Remove the original 308-3674 Level Sensor (Image1.2.1).
Image1.2.1
4. Install new 355-4059 Level Sensor (Image1.3.1). This is a direct replacement for 308-3674. Connections are the same.
5. Fill coolant to the appropriate level.
6. Return the unit to service.
Image1.3.1
Further information:
Processes have been improved to ensure the 355-4059 sensors are fully sealed internally.