KIT-RELIEF VALVE 6R4347 - Caterpillar

Illustration 2 g03733211
Section A-A
Table 2
Item    Qty    Part    Specification Description    
F     4     192-0573 Dowel Pin     Extension of the dowel pin from the surface of the body (6) is
2.67 to 2.92 mm (0.105 to 0.115 inch).    
7     4     193-1736 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
8     1     423-2128 Driven Barrel     Port location of both the barrel ports must be matched when the right pump and the left pump assemble.    
9     1     273-8314 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
10     2     273-8315 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
11     18     341-2872 Spring     Length under test force is
31 mm (1.2 inch).    
Test force is
233.3 23.0 N (52.4 5.2 lb).
Free length after test is
36 mm (1.4 inch).
Illustration 3 g03733212
Section C-C
Table 3
Item    Qty    Part    Specification Description    
12     2     190-4896 Plug     Before assembly, apply blue Loctite 5127 GM to the threads.    
Torque to
25 3 N m (221 27 lb in)
13     2     247-8920 Orifice     Torque to
13 2 N m (115 18 lb in)    
Illustration 4 g03884833
Section G-G
Illustration 5 g03733214
Section H-H
Table 4
Item    Qty    Part    Specification Description    
14     2     4I-1022 Orifice     Torque to
13 2 N m (115 18 lb in).    
15     2     7M-8485 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
16     2     8J-4645 Plug     Tighten to
210 to 231 N m (155 to 170 lb ft).    
17     1     096-3944 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
18     1     341-2862 Lip Type Seal     Lightly lubricate the sealing lip with the lubricant that is being sealed.    
19     2     8T-4136 Bolt     Torque to
44 4 N m (32 3 lb ft).    
J     4     094-1875 Dowel     Extension of the dowel from the body (20) is
5.55 to 5.80 mm (0.219 to 0.228 inch).    
21     1     423-2123 Drive Barrel     Port location of both the barrel ports must be matched when the right pump and the left pump assemble.