6V5949 KIT-GASKET Caterpillar parts
3508, 3512
Rating:
Alternative (cross code) number:
CA6V5949
6V-5949
6V5949
CA6V5949
6V-5949
6V5949
Weight: 0.80 pounds 0 kg.
GEN SET ENGINE, MARINE ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$160.75
26 Mar 2022
US: Florida-Parts-Z
6V5949 - Oil Cooler & LINES-8N5806 & 1W4217 ARS fit Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$368.37
27 May 2021
1.97[0.89] Pounds
US: Highway And Hea
6V5949 | Caterpillar Gasket Set, Oil Cooler & Lines
HHP HIGHWAY & HEAVY PARTS HHP provides parts equal or better in quality compared to the OE at a fraction of the cost. || Products are crafted with hard-wearing materials for long-lasting strength and durability. || Parts meet or exceed OEM specifications to ensure proper fit and function. || Image(s) is for illustration purposes only and may not represent the actual part. || Products are only sourced from quality certified manufacturing facilities.
HHP HIGHWAY & HEAVY PARTS HHP provides parts equal or better in quality compared to the OE at a fraction of the cost. || Products are crafted with hard-wearing materials for long-lasting strength and durability. || Parts meet or exceed OEM specifications to ensure proper fit and function. || Image(s) is for illustration purposes only and may not represent the actual part. || Products are only sourced from quality certified manufacturing facilities.
$156.03
24 May 2019
200 Hundredths Pounds
CTP: CTP
6V5949 Group-Oil Cooler/Lines Fits Caterpillar SR4
Warranty
Warranty
For full view, you need register
Compatible equipment models: 6V5949:
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Snap Ring Pliers 1
B 1P-0510 Driver Group 1
C 1P-1855 Snap Ring Pliers 1
D 9S-9152 Bearing Puller 1 Start By:
Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00792160
Illustration 2 g00792161
Put identification marks on the pump housings (1) and separate the housings. Remove gasket (2) between the housings.
Illustration 3 g00792163
Illustration 4 g00792169
Remove locknut (4), the washer, and gear (3).
Remove retainer ring (5) with Tooling (A).
Illustration 5 g00792172
Illustration 6 g00792175
Remove nut (6) from the impeller shaft.
Use Tooling (B) and a suitable press to remove the impeller shaft from the impeller.
Remove impeller (7) from the housing.
Illustration 7 g00792177
Illustration 8 g00792178
Remove water pump seal assembly (8). Separate the components. Inspect each component.
Illustration 9 g00792183
Use Tooling (B) and a suitable press to remove the impeller shaft completely out of the pump housing.
Illustration 10 g00792239
Remove key (9) and shims (11). Remove retainer ring (10 ) from bearing with Tooling (C).
Remove key (13), spacer (12), and the retainer ring. Remove the retainer ring with Tooling (C).
Illustration 11 g00792281
Use Tooling (D) and a suitable press. Push the shaft from bearings (14) and spacer (15).
Illustration 12 g00792202
Remove lock (17) and remove gear assembly (16).
Illustration 13 g00792216
Use Tooling (D) and a suitable press to push gear from the shaft.
Illustration 14 g00792221
Use Tooling (D) and a suitable press. Push the shaft from bearings (18) and spacer (19).
Illustration 15 g00792228
Illustration 16 g00792230
Remove ceramic ring (20).
Remove slinger (21) from the pump housing.
Illustration 17 g00792235
Remove lip seal (22) from the pump housing.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Snap Ring Pliers 1
B 1P-0510 Driver Group 1
C 1P-1855 Snap Ring Pliers 1
D 9S-9152 Bearing Puller 1 Start By:
Remove the auxiliary water pump. Refer to Disassembly and Assembly, "Auxiliary Water Pump - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00792160
Illustration 2 g00792161
Put identification marks on the pump housings (1) and separate the housings. Remove gasket (2) between the housings.
Illustration 3 g00792163
Illustration 4 g00792169
Remove locknut (4), the washer, and gear (3).
Remove retainer ring (5) with Tooling (A).
Illustration 5 g00792172
Illustration 6 g00792175
Remove nut (6) from the impeller shaft.
Use Tooling (B) and a suitable press to remove the impeller shaft from the impeller.
Remove impeller (7) from the housing.
Illustration 7 g00792177
Illustration 8 g00792178
Remove water pump seal assembly (8). Separate the components. Inspect each component.
Illustration 9 g00792183
Use Tooling (B) and a suitable press to remove the impeller shaft completely out of the pump housing.
Illustration 10 g00792239
Remove key (9) and shims (11). Remove retainer ring (10 ) from bearing with Tooling (C).
Remove key (13), spacer (12), and the retainer ring. Remove the retainer ring with Tooling (C).
Illustration 11 g00792281
Use Tooling (D) and a suitable press. Push the shaft from bearings (14) and spacer (15).
Illustration 12 g00792202
Remove lock (17) and remove gear assembly (16).
Illustration 13 g00792216
Use Tooling (D) and a suitable press to push gear from the shaft.
Illustration 14 g00792221
Use Tooling (D) and a suitable press. Push the shaft from bearings (18) and spacer (19).
Illustration 15 g00792228
Illustration 16 g00792230
Remove ceramic ring (20).
Remove slinger (21) from the pump housing.
Illustration 17 g00792235
Remove lip seal (22) from the pump housing.
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
3512
14G, 16G, 3176, 3176B, 3304, 3306, 3306B, 3406B, 3406E, 3512, 615C, 621, 621E, 621R, 815B, 966C, 966D, 966F, 966F II, 980C, 980F, C-10, C-12, D25C, D300B, D30C, D350C, D35C
3508, 3512, 3516
3508, 3512, 3516
3512, 3516, G3512
3508
3508
3512, G3512
3512
3512
3512
3512
3508
1457814
KIT-GASKET
3508
3508
3508
3508
3508, 3512, 3516
6V5503
KIT-GASKET
3508
3508
3508
3508
3508, 3512, 3516, 777B, 785, 789, D11N
3508, 3508B, 3512, 3512B, 3516, 3516B, 5130, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B, D11N, G3508, G3512, G3516
3508, 3512
3508, 3508B, 3512, 3512B, 3516, 793B