KIT 7D9908 - Caterpillar

Illustration 5 g01640552Engine Serial Number (6)____________________Transmission Serial Number (7)____________________Custom Options (8)____________________ Stamp "Z"Other machine information is also listed, if necessary.The engine serial number plate is on the bottom left side of the engine just above the oil dipstick.
Illustration 6 g06319424
Illustration 7 g03788035Engine Serial Number (9)____________________The serial number plate of the bulldozer is on the back of the blade.
Illustration 8 g03796626
Illustration 9 g01057098Bulldozer Serial Number ____________________The serial number plate for the ripper is on the side of the ripper.
Illustration 10 g01209617
Illustration 11 g01057104Ripper Serial Number ____________________The serial number plate for the winch is on the side of the winch.
Illustration 12 g01209622
Illustration 13 g01323812Winch Serial Number ____________________Electromagnetic Emissions
Note: This label is on machines that are going into Canada.
Illustration 14 g06063443If equipped, this label is located next to the Pin plate. This label verifies that the product meets the requirements of ICES-002 Issue 6. Compliance to ICES-002 Issue 6 is accomplished by meeting electromagnetic emissions industry standard CISPR-12.Certifications
ROPS/FOPS Plate (5)
The message is positioned on the rear side of the left cab post.
Illustration 15 g03041682
Illustration 16 g01212169
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without payload, should not exceed the mass on the certification plate.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.Sound Certification
Illustration 17 g00933634
A typical example of this film is shown. Your machine may have a different value.
If equipped, the certification film is used to verify the environmental sound certification of the machine to the requirements of the European Union. The value that is listed on the label indicates the guaranteed sound power level LwA at the time of manufacture for the conditions that are specified in "2000/14/EC".