KIT-RELIEF VALVE 7R3825 - Caterpillar

There may be several specific warning signs on an engine. The exact location of the hazards and the description of the hazards are reviewed in this section. Become familiar with all warning signs.Ensure that all of the warning signs are legible. Clean the warning signs or replace the warning signs if the words cannot be read or if the pictures are not visible. When the warning signs are cleaned, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the warning signs. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the warning signs. The warning signs that are loosened could drop off the engine.Replace any damaged warning signs or missing warning signs. If a warning sign is attached to a part of the engine that is replaced, install a new warning sign on the replacement part. Any Cat dealer can provide new warning signs.The warning labels that may be found on the engine are illustrated and described below.
Illustration 1 g03874092
Illustration 2 g03873979
Illustration 3 g03204098
View of the rear of a Cat C18 Marine Generator Set
Universal Warning (1)One safety message is located on each side of the terminal box. One safety message is located on both sides of the engine.
Illustration 4 g01370904
Do not operate or work on this product unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Hot Surface (2)One message is located on each side of the barrel of the generator. This message is also located on the left and right side of the radiator.
Illustration 5 g01384734
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Hot Fluid Under Pressure (3)One message is located on each expansion tank. The message is also located on top of the radiator expansion tanks near the cap.
Illustration 6 g01371640
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Lifting the Genset (4)This safety message for lifting the genset is located on the side panels of the terminal box.
Illustration 7 g01433231
Crushing Hazard! Improper lifting could cause serious injury or death. Follow the lifting instructions in the Operation and Maintenance Manual for safe lifting procedures.
Automatic Starting (5)The safety message for automatic starting is located on the sides of the terminal box.
Illustration 8 g01392484
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode.
Electrical Shock (6)The safety message for electrical