KIT-HYD CYLINDER SEAL 7X2769 - Caterpillar

System Operation Description:An engine oil pressure event can be generated by either the engine ECM or the EMCP 4, depending on the configuration of the EMCP 4. The engine oil pressure sensor can be configured for either datalink or sensor. If the oil pressure sensor is configured for datalink, the oil pressure event can be generated by either the engine ECM or the EMCP 4. The event may also be generated by both of the ECMs. If the oil pressure sensor is configured for sensor, the oil pressure event can be generated by one or more of the analog inputs.Only low warning and low shutdown events are supported for engine oil pressure. If configured for CAN 1 datalink, the engine ECM will monitor the oil pressure and send a message to the EMCP 4 for low oil pressure warning and shutdown events. The low warning and shutdown thresholds in the engine ECM are non-configurable setpoints. If during the commissioning of a genset, or any other time, the EMCP 4 can generate these events. The EMCP 4 will monitor and respond to setpoints for oil pressure even when the engine oil pressure sensor is configured for data link using the setpoints available in the engine oil pressure monitor menu.With the engine oil pressure sensor configured for sensor, the oil pressure sensor must be connected to an EMCP 4 analog input.