KIT-SEAL 8I3893 - Caterpillar

Alternate Exit is the Rear Window
Window Link
This is the alternate exit for cabs (S/N: CMX1-179).The rear window can be used as an alternate exit on pipelayers with cabs. If the primary exit is blocked, exit the machine through the rear window.
Illustration 1 g01233775
Inside view of rear windowPull window link (1) in order to release the window from the interlocking slot. Open the window fully and exit the machine.Hammer
This is the alternate exit for cabs (S/N: CMX180-Up).If equipped, this message is located inside the cab on the right hand side next to the hammer. If the primary exit is blocked, use the hammer to break the rear window. Exit the machine through the rear window.
Illustration 2 g00904433
Alternate Exit - The window to the rear of the operator serves as an alternate exit.
Break Glass - Perform the following procedure in order to exit through the rear window. A hammer is mounted on the right side of the instrument panel inside the cab. Strike the rear window with the hammer in order to break the glass. Climb through the opening of the rear window in order to exit the cab.