KIT-SEAL 8Q6223 - Caterpillar

Illustration 36 g01457859
Use Tooling (P) to measure the sensor signal voltage. Measure each output speed sensor.
Record the values in Table 10.
The voltage must be between 1.1 VRMS and 4.6 VRMS.
Verify that both output speed sensors continue to have output.
Record the values in Table 10.Transmission Bench Test Data Sheet
Table 5
CATERPILLAR     Transmission Bench Test Data Sheet     Test Date:__________    
Model:__________
Work Order:__________     Serial No.:__________    Harness Test
Table 6
Solenoid Test     Solenoid 1     Solenoid 2     Solenoid 3     Solenoid 4     Solenoid 5    
________ ohms
________ ohms    
________ ohms    
________ ohms    
________ ohms    Start Checks
Table 7
Lubrication Oil Pressure     Input Speed (700 30 rpm)
Input Flow
53 3.8 L/min (14 1 US gpm)
Supply Pressure
2792 69 kPa (405 10 psi)     __________kPa
__________(psi)    Lubrication Circuit
Table 8
Lubrication Circuit Check     Gear Range FORWARD 2
Input Speed (1900 30 rpm)
Lubrication Flow
76 3.8 L/min (20 1 US gpm)    
Average Lubrication Oil Pressure Of Arrangement     __________kPa
__________(psi)     Lubrication Oil Pressure     __________kPa
__________(psi)    Clutch Leakage Check
Table 9
Clutch Leakage Check     Input Speed (1900 30 rpm)
Input Flow
98 3.8 L/min (26 1 US gpm)
Supply Pressure
2896 205 kPa (420 30 psi)    
Gear Range     1F     2F     3F     1R     2R     3R     N    
Input Flow     ______     ______     ______     ______     ______     ______     ______    
Output Flow     ______     ______     ______     ______     ______     ______     ______    
Leakage     ______     ______     ______     ______     ______     ______     ______    
Average of Arrangement     ______     ______     ______     ______     ______     ______     ______    Speed Sensor Test
Table 10
Speed Sensor Test     Input Speed (700 5 rpm)
Input Flow
53 3.8 L/min (14 1 US gpm)
Supply Pressure
2792 69 kPa (405 10 psi)    
Sensor     Gear Range    
FORWARD 1 FORWARD 2    
Output Speed Sensor 1     __________________ VRMS     __________________ VRMS    
Output Speed Sensor 2     __________________ VRMS     __________________VRMS    ISO Particle Count
Table 11
ISO Particle Count     Sample the test bench oil supply.
    ________/________Particle Count    
Table 12
______________________________________
Technician    
______________________________________
Supervisor