8T2216 KIT-HYD CYLINDER SEAL Caterpillar parts
D5H
Rating:
Alternative (cross code) number:
CA8T2216
8T-2216
8T2216
CA8T2216
8T-2216
8T2216
Weight: 1 pounds 0 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 8T2216:
Number on catalog scheme:
None
For full view, you need register
Information:
TRACTORS
D5M (6GN, 3CR, 7LR, 5ES, 6AS),
D6M (3WN, 4JN, 5NR, 6LR, 4HS) TRACK-TYPE TRACTORSProblem:
Some reports have been received that the 9U-8076 Check Valve has failed in some priority valves. When the valve fails, oil is allowed to flow from the high pressure (controls) side to the low pressure (converter) side of the system. This scenario results in low system pressure available to the transmission and brake control valves. The general symptom has been that the brakes drag whenever the priority valve is at low pressure.Solution:
During proper operation, the priority valve raises the low pressure side to high pressure in order to supplement high pressure pump flow under the following conditions:1. Cold oil (below 40 °C (104.0 °F) 2. Engine speed below 1300 RPM with the parking brake OFF3. During a shift (speed or direction)If the machine operates correctly when the priority valve is at high pressure, but operates poorly when the priority valve is at low pressure, then a failed check valve is the most likely cause of the problem. Inspect the 9U-8076 Check Valve within the priority valve. Replace the valve, as required.COPYRIGHT 1998 CATERPILLAR ALL RIGHTS RESERVED
D5M (6GN, 3CR, 7LR, 5ES, 6AS),
D6M (3WN, 4JN, 5NR, 6LR, 4HS) TRACK-TYPE TRACTORSProblem:
Some reports have been received that the 9U-8076 Check Valve has failed in some priority valves. When the valve fails, oil is allowed to flow from the high pressure (controls) side to the low pressure (converter) side of the system. This scenario results in low system pressure available to the transmission and brake control valves. The general symptom has been that the brakes drag whenever the priority valve is at low pressure.Solution:
During proper operation, the priority valve raises the low pressure side to high pressure in order to supplement high pressure pump flow under the following conditions:1. Cold oil (below 40 °C (104.0 °F) 2. Engine speed below 1300 RPM with the parking brake OFF3. During a shift (speed or direction)If the machine operates correctly when the priority valve is at high pressure, but operates poorly when the priority valve is at low pressure, then a failed check valve is the most likely cause of the problem. Inspect the 9U-8076 Check Valve within the priority valve. Replace the valve, as required.COPYRIGHT 1998 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
931B
1U4601
KIT-SEAL
D6H
D6H
4H4391
KIT (12 VANES)
172, 46
172, 46
3T0574
KIT-BRUSH
910, 931B
910, 931B
9G5193
KIT-HARDWARE
910, 931B
910, 931B
9G5194
KIT-INSULATOR
910, 931B
910, 931B
9X4778
KIT-GAUGE CLUSTER BEZEL
910E, 918F, 936F, IT12B
910E, 918F, 936F, IT12B
1U0551
KIT-REAR SECTION
931B, D4C
931B, D4C
1U0550
KIT-SEAL
931B, D4C
931B, D4C
931B